Is Georgian Technical University a public or private university?

GTU is a public university, founded in 1922 in Tbilisi and granted full university status in 1990. It is Georgia's largest technical university, with 13 faculties and about 20,400 students, and has been a full member of the European University Association (EUA) since 2001.

Which GTU programmes are actually taught in English?

GTU's English-medium offerings include Bachelor's degrees in Computer Science, Computer Engineering, Biomedical Engineering (Faculty of Informatics and Control Systems), Civil Engineering (Faculty of Construction), Mechanical Engineering (Faculty of Transportation Systems and Mechanical Engineering), and Design/Architecture (International Design School), plus Master's degrees including Business Administration and Biomedical Engineering. Most other GTU programmes are Georgian- or Russian-medium.

How much does an English-medium programme cost at GTU?

GTU's own fee schedule and FAQ page set a flat GEL 12,500 per year (about USD 4,700) for English-language programmes at Bachelor's, Master's and Doctoral level alike, for applicants admitted outside Georgia's Unified National Exam system. This differs from the much lower GEL 2,250-4,500 rates that apply to Georgian-citizen National Exam admits.

Can I get direct admission straight after high school?

Yes. International applicants are admitted under a separate route (Ministry Order 224/N, 2011) rather than Georgia's Unified National Exams, based on a secondary-school completion certificate and English-proficiency proof. Requirements vary slightly by faculty: Computer Science and Civil Engineering require B2-level English or an interview, while Mechanical Engineering accepts B1-level English or a 70%-plus English score.

What English-test score is required?

Requirements vary by faculty. Civil Engineering and Computer Science require B2-level proof via TOEFL, IELTS, Cambridge ESOL, TELC or Michigan, or a GTU English interview/test if no certificate is held. Mechanical Engineering's published bar is B1 level, or 70%-plus in English on the Unified National Exams. Native English speakers and applicants schooled fully in English are exempted.

How do I apply, and who do I contact?

International applicants complete GTU's online preliminary registration, submit education documents and English-proficiency proof, and can use an optional paid assistance service (USD 300) for translating, notarising and submitting documents to Georgia's National Center for Educational Quality Enhancement (NCEQE) for recognition. GTU's International Admissions Office can be reached at admissionoffice@gtu.ge.

Does the MBA have a separate entrance exam?

Yes. Master's applicants, including MBA applicants, must hold a bachelor's degree and pass entrance exams: a common national master's exam plus a GTU-set exam in English, unless a Ministry of Education and Science-approved exemption applies. This is a separate step from the Bachelor's-level admission process used for the engineering programmes.

Do I need a special pre-approval certificate before applying, like Germany's APS?

Georgia has no APS-style pre-approval certificate. International applicants instead submit their secondary or prior-degree certificate for recognition through NCEQE as part of enrolment, which issues a Recognition Letter and Order before GTU's Rector's Order finalises admission and releases visa-supporting documents.

What visa do I need, and how does the process work?

Students who need a visa apply for a D3 study visa before travelling, using a Reference Letter, Invitation Letter and Rector's Order issued by GTU, per Georgia's Ministry of Foreign Affairs (geoconsul.gov.ge). After arrival, students apply for a Temporary Residence Permit through Georgia's Public Service Development Agency to remain legally enrolled for the programme's duration.

When do programmes start, and is there more than one intake?

GTU's own English pages describe enrolment as a sequential process (application, NCEQE recognition, Rector's Order) rather than publishing a single confirmed international deadline; third-party admissions sources describe a September (Fall) intake and a February/March (Spring) intake with rolling review. Applicants should confirm the current intake window directly with GTU's International Admissions Office.

What does GTU's accreditation actually mean for students?

GTU is nationally accredited by Georgia's National Center for Educational Quality Enhancement (NCEQE), Georgia's national higher-education quality-assurance agency. NCEQE is currently listed as "member under review" in ENQA's membership database (European Association for Quality Assurance in Higher Education), not a confirmed full member, and its EQAR registration also lapsed in April 2024. GTU has also been a full EUA member since 2001 and implements ECTS credits under the Bologna Process, supporting European academic-credit recognition.

Are GTU's engineering degrees ABET-accredited?

Not confirmed as accredited. GTU's own Biomedical Engineering and Civil Engineering curriculum documents state the programmes are 'prepared in accordance with ABET accreditation standards' and reference named ABET-accredited peer programmes for comparison, but GTU has not published independent confirmation that it holds actual ABET accreditation. Applicants who need ABET-equivalent recognition should verify current status directly with GTU.

How does GTU compare with Georgia's other technical and engineering options?

GTU is Georgia's largest and oldest dedicated technical university, distinct from Georgia's many medical-faculty-focused private universities, and offers a markedly lower flat international tuition (GEL 12,500/year, about USD 4,700) than most Western European technical universities, though its QS ranking (1001-1200 band, 2026) and less-developed international-student support infrastructure reflect that lower cost.

Is Georgian Technical University a public or private university?

GTU is a public university, founded in 1922 in Tbilisi and granted full university status in 1990. It is Georgia's largest technical university, with 13 faculties and about 20,400 students, and has been a full member of the European University Association (EUA) since 2001.

Which GTU programmes are actually taught in English?

GTU's English-medium offerings include Bachelor's degrees in Computer Science, Computer Engineering, Biomedical Engineering (Faculty of Informatics and Control Systems), Civil Engineering (Faculty of Construction), Mechanical Engineering (Faculty of Transportation Systems and Mechanical Engineering), and Design/Architecture (International Design School), plus Master's degrees including Business Administration and Biomedical Engineering. Most other GTU programmes are Georgian- or Russian-medium.

How much does an English-medium programme cost at GTU?

GTU's own fee schedule and FAQ page set a flat GEL 12,500 per year (about USD 4,700) for English-language programmes at Bachelor's, Master's and Doctoral level alike, for applicants admitted outside Georgia's Unified National Exam system. This differs from the much lower GEL 2,250-4,500 rates that apply to Georgian-citizen National Exam admits.

Can I get direct admission straight after high school?

Yes. International applicants are admitted under a separate route (Ministry Order 224/N, 2011) rather than Georgia's Unified National Exams, based on a secondary-school completion certificate and English-proficiency proof. Requirements vary slightly by faculty: Computer Science and Civil Engineering require B2-level English or an interview, while Mechanical Engineering accepts B1-level English or a 70%-plus English score.

What English-test score is required?

Requirements vary by faculty. Civil Engineering and Computer Science require B2-level proof via TOEFL, IELTS, Cambridge ESOL, TELC or Michigan, or a GTU English interview/test if no certificate is held. Mechanical Engineering's published bar is B1 level, or 70%-plus in English on the Unified National Exams. Native English speakers and applicants schooled fully in English are exempted.

How do I apply, and who do I contact?

International applicants complete GTU's online preliminary registration, submit education documents and English-proficiency proof, and can use an optional paid assistance service (USD 300) for translating, notarising and submitting documents to Georgia's National Center for Educational Quality Enhancement (NCEQE) for recognition. GTU's International Admissions Office can be reached at admissionoffice@gtu.ge.

Does the MBA have a separate entrance exam?

Yes. Master's applicants, including MBA applicants, must hold a bachelor's degree and pass entrance exams: a common national master's exam plus a GTU-set exam in English, unless a Ministry of Education and Science-approved exemption applies. This is a separate step from the Bachelor's-level admission process used for the engineering programmes.

Do I need a special pre-approval certificate before applying, like Germany's APS?

Georgia has no APS-style pre-approval certificate. International applicants instead submit their secondary or prior-degree certificate for recognition through NCEQE as part of enrolment, which issues a Recognition Letter and Order before GTU's Rector's Order finalises admission and releases visa-supporting documents.

What visa do I need, and how does the process work?

Students who need a visa apply for a D3 study visa before travelling, using a Reference Letter, Invitation Letter and Rector's Order issued by GTU, per Georgia's Ministry of Foreign Affairs (geoconsul.gov.ge). After arrival, students apply for a Temporary Residence Permit through Georgia's Public Service Development Agency to remain legally enrolled for the programme's duration.

When do programmes start, and is there more than one intake?

GTU's own English pages describe enrolment as a sequential process (application, NCEQE recognition, Rector's Order) rather than publishing a single confirmed international deadline; third-party admissions sources describe a September (Fall) intake and a February/March (Spring) intake with rolling review. Applicants should confirm the current intake window directly with GTU's International Admissions Office.

What does GTU's accreditation actually mean for students?

GTU is nationally accredited by Georgia's National Center for Educational Quality Enhancement (NCEQE), Georgia's national higher-education quality-assurance agency. NCEQE is currently listed as "member under review" in ENQA's membership database (European Association for Quality Assurance in Higher Education), not a confirmed full member, and its EQAR registration also lapsed in April 2024. GTU has also been a full EUA member since 2001 and implements ECTS credits under the Bologna Process, supporting European academic-credit recognition.

Are GTU's engineering degrees ABET-accredited?

Not confirmed as accredited. GTU's own Biomedical Engineering and Civil Engineering curriculum documents state the programmes are 'prepared in accordance with ABET accreditation standards' and reference named ABET-accredited peer programmes for comparison, but GTU has not published independent confirmation that it holds actual ABET accreditation. Applicants who need ABET-equivalent recognition should verify current status directly with GTU.

How does GTU compare with Georgia's other technical and engineering options?

GTU is Georgia's largest and oldest dedicated technical university, distinct from Georgia's many medical-faculty-focused private universities, and offers a markedly lower flat international tuition (GEL 12,500/year, about USD 4,700) than most Western European technical universities, though its QS ranking (1001-1200 band, 2026) and less-developed international-student support infrastructure reflect that lower cost.

India's Trusted
Study Abroad Platform

MBA at Georgian Technical University: Eligibility & Requirements

Eligibility criteria and academic qualifications needed to apply for MBA at Georgian Technical University.

Written by Students Traffic Research Team·Updated On: 12 Jul 2026

Georgian Technical University campus overview

Georgian Technical UniversityTbilisi, GeorgiaMBA · PublicGEL 12,500/yr

Academics recognition admissions fees

Eligibility at a Glance

Program

MBA

Duration

2 years

Medium

English

University type

Public

Eligibility Criteria

The programme's academic and document requirements are being verified with the university.

Detailed academic requirements have not yet been published for this programme.

Who This Program Fits

Applying to Georgian Technical University?

Students Traffic verifies seat availability, checks current recognition status, and prepares your complete application for Georgian Technical University. The consultation is free.

Call us Compare colleges

MBA at Georgian Technical University: Eligibility & Requirements

Eligibility criteria and academic qualifications needed to apply for MBA at Georgian Technical University.

Written by Students Traffic Research Team·Updated On: 12 Jul 2026

Georgian Technical UniversityTbilisi, GeorgiaMBA · PublicGEL 12,500/yr

Academics recognition admissions fees

Eligibility at a Glance

Program

MBA

Duration

2 years

Medium

English

University type

Public

Eligibility Criteria

The programme's academic and document requirements are being verified with the university.

Detailed academic requirements have not yet been published for this programme.

Who This Program Fits

Applying to Georgian Technical University?

Students Traffic verifies seat availability, checks current recognition status, and prepares your complete application for Georgian Technical University. The consultation is free.

Call us Compare colleges

Cost-conscious international engineering applicants who want a genuine English-medium Bachelor's degree (GEL 12,500/year, about USD 4,700) at a large, long-established state technical university rather than a private or boutique institution.

Students interested in Computer Science, Biomedical Engineering, Civil Engineering or Mechanical Engineering who want curricula built around outcomes-based Program Educational Objectives similar to US engineering-accreditation frameworks.

Applicants who want a single flat international tuition rate across both undergraduate and postgraduate English-taught programmes, which simplifies multi-year budgeting.

Cost-conscious international engineering applicants who want a genuine English-medium Bachelor's degree (GEL 12,500/year, about USD 4,700) at a large, long-established state technical university rather than a private or boutique institution.

Students interested in Computer Science, Biomedical Engineering, Civil Engineering or Mechanical Engineering who want curricula built around outcomes-based Program Educational Objectives similar to US engineering-accreditation frameworks.

Applicants who want a single flat international tuition rate across both undergraduate and postgraduate English-taught programmes, which simplifies multi-year budgeting.