Is Georgian Technical University a public or private university?

GTU is a public university, founded in 1922 in Tbilisi and granted full university status in 1990. It is Georgia's largest technical university, with 13 faculties and about 20,400 students, and has been a full member of the European University Association (EUA) since 2001.

Which GTU programmes are actually taught in English?

GTU's English-medium offerings include Bachelor's degrees in Computer Science, Computer Engineering, Biomedical Engineering (Faculty of Informatics and Control Systems), Civil Engineering (Faculty of Construction), Mechanical Engineering (Faculty of Transportation Systems and Mechanical Engineering), and Design/Architecture (International Design School), plus Master's degrees including Business Administration and Biomedical Engineering. Most other GTU programmes are Georgian- or Russian-medium.

How much does an English-medium programme cost at GTU?

GTU's own fee schedule and FAQ page set a flat GEL 12,500 per year (about USD 4,700) for English-language programmes at Bachelor's, Master's and Doctoral level alike, for applicants admitted outside Georgia's Unified National Exam system. This differs from the much lower GEL 2,250-4,500 rates that apply to Georgian-citizen National Exam admits.

Can I get direct admission straight after high school?

Yes. International applicants are admitted under a separate route (Ministry Order 224/N, 2011) rather than Georgia's Unified National Exams, based on a secondary-school completion certificate and English-proficiency proof. Requirements vary slightly by faculty: Computer Science and Civil Engineering require B2-level English or an interview, while Mechanical Engineering accepts B1-level English or a 70%-plus English score.

What English-test score is required?

Requirements vary by faculty. Civil Engineering and Computer Science require B2-level proof via TOEFL, IELTS, Cambridge ESOL, TELC or Michigan, or a GTU English interview/test if no certificate is held. Mechanical Engineering's published bar is B1 level, or 70%-plus in English on the Unified National Exams. Native English speakers and applicants schooled fully in English are exempted.

How do I apply, and who do I contact?

International applicants complete GTU's online preliminary registration, submit education documents and English-proficiency proof, and can use an optional paid assistance service (USD 300) for translating, notarising and submitting documents to Georgia's National Center for Educational Quality Enhancement (NCEQE) for recognition. GTU's International Admissions Office can be reached at admissionoffice@gtu.ge.

Does the MBA have a separate entrance exam?

Yes. Master's applicants, including MBA applicants, must hold a bachelor's degree and pass entrance exams: a common national master's exam plus a GTU-set exam in English, unless a Ministry of Education and Science-approved exemption applies. This is a separate step from the Bachelor's-level admission process used for the engineering programmes.

Do I need a special pre-approval certificate before applying, like Germany's APS?

Georgia has no APS-style pre-approval certificate. International applicants instead submit their secondary or prior-degree certificate for recognition through NCEQE as part of enrolment, which issues a Recognition Letter and Order before GTU's Rector's Order finalises admission and releases visa-supporting documents.

What visa do I need, and how does the process work?

Students who need a visa apply for a D3 study visa before travelling, using a Reference Letter, Invitation Letter and Rector's Order issued by GTU, per Georgia's Ministry of Foreign Affairs (geoconsul.gov.ge). After arrival, students apply for a Temporary Residence Permit through Georgia's Public Service Development Agency to remain legally enrolled for the programme's duration.

When do programmes start, and is there more than one intake?

GTU's own English pages describe enrolment as a sequential process (application, NCEQE recognition, Rector's Order) rather than publishing a single confirmed international deadline; third-party admissions sources describe a September (Fall) intake and a February/March (Spring) intake with rolling review. Applicants should confirm the current intake window directly with GTU's International Admissions Office.

What does GTU's accreditation actually mean for students?

GTU is nationally accredited by Georgia's National Center for Educational Quality Enhancement (NCEQE), Georgia's national higher-education quality-assurance agency. NCEQE is currently listed as "member under review" in ENQA's membership database (European Association for Quality Assurance in Higher Education), not a confirmed full member, and its EQAR registration also lapsed in April 2024. GTU has also been a full EUA member since 2001 and implements ECTS credits under the Bologna Process, supporting European academic-credit recognition.

Are GTU's engineering degrees ABET-accredited?

Not confirmed as accredited. GTU's own Biomedical Engineering and Civil Engineering curriculum documents state the programmes are 'prepared in accordance with ABET accreditation standards' and reference named ABET-accredited peer programmes for comparison, but GTU has not published independent confirmation that it holds actual ABET accreditation. Applicants who need ABET-equivalent recognition should verify current status directly with GTU.

How does GTU compare with Georgia's other technical and engineering options?

GTU is Georgia's largest and oldest dedicated technical university, distinct from Georgia's many medical-faculty-focused private universities, and offers a markedly lower flat international tuition (GEL 12,500/year, about USD 4,700) than most Western European technical universities, though its QS ranking (1001-1200 band, 2026) and less-developed international-student support infrastructure reflect that lower cost.

Is Georgian Technical University a public or private university?

GTU is a public university, founded in 1922 in Tbilisi and granted full university status in 1990. It is Georgia's largest technical university, with 13 faculties and about 20,400 students, and has been a full member of the European University Association (EUA) since 2001.

Which GTU programmes are actually taught in English?

GTU's English-medium offerings include Bachelor's degrees in Computer Science, Computer Engineering, Biomedical Engineering (Faculty of Informatics and Control Systems), Civil Engineering (Faculty of Construction), Mechanical Engineering (Faculty of Transportation Systems and Mechanical Engineering), and Design/Architecture (International Design School), plus Master's degrees including Business Administration and Biomedical Engineering. Most other GTU programmes are Georgian- or Russian-medium.

How much does an English-medium programme cost at GTU?

GTU's own fee schedule and FAQ page set a flat GEL 12,500 per year (about USD 4,700) for English-language programmes at Bachelor's, Master's and Doctoral level alike, for applicants admitted outside Georgia's Unified National Exam system. This differs from the much lower GEL 2,250-4,500 rates that apply to Georgian-citizen National Exam admits.

Can I get direct admission straight after high school?

Yes. International applicants are admitted under a separate route (Ministry Order 224/N, 2011) rather than Georgia's Unified National Exams, based on a secondary-school completion certificate and English-proficiency proof. Requirements vary slightly by faculty: Computer Science and Civil Engineering require B2-level English or an interview, while Mechanical Engineering accepts B1-level English or a 70%-plus English score.

What English-test score is required?

Requirements vary by faculty. Civil Engineering and Computer Science require B2-level proof via TOEFL, IELTS, Cambridge ESOL, TELC or Michigan, or a GTU English interview/test if no certificate is held. Mechanical Engineering's published bar is B1 level, or 70%-plus in English on the Unified National Exams. Native English speakers and applicants schooled fully in English are exempted.

How do I apply, and who do I contact?

International applicants complete GTU's online preliminary registration, submit education documents and English-proficiency proof, and can use an optional paid assistance service (USD 300) for translating, notarising and submitting documents to Georgia's National Center for Educational Quality Enhancement (NCEQE) for recognition. GTU's International Admissions Office can be reached at admissionoffice@gtu.ge.

Does the MBA have a separate entrance exam?

Yes. Master's applicants, including MBA applicants, must hold a bachelor's degree and pass entrance exams: a common national master's exam plus a GTU-set exam in English, unless a Ministry of Education and Science-approved exemption applies. This is a separate step from the Bachelor's-level admission process used for the engineering programmes.

Do I need a special pre-approval certificate before applying, like Germany's APS?

Georgia has no APS-style pre-approval certificate. International applicants instead submit their secondary or prior-degree certificate for recognition through NCEQE as part of enrolment, which issues a Recognition Letter and Order before GTU's Rector's Order finalises admission and releases visa-supporting documents.

What visa do I need, and how does the process work?

Students who need a visa apply for a D3 study visa before travelling, using a Reference Letter, Invitation Letter and Rector's Order issued by GTU, per Georgia's Ministry of Foreign Affairs (geoconsul.gov.ge). After arrival, students apply for a Temporary Residence Permit through Georgia's Public Service Development Agency to remain legally enrolled for the programme's duration.

When do programmes start, and is there more than one intake?

GTU's own English pages describe enrolment as a sequential process (application, NCEQE recognition, Rector's Order) rather than publishing a single confirmed international deadline; third-party admissions sources describe a September (Fall) intake and a February/March (Spring) intake with rolling review. Applicants should confirm the current intake window directly with GTU's International Admissions Office.

What does GTU's accreditation actually mean for students?

GTU is nationally accredited by Georgia's National Center for Educational Quality Enhancement (NCEQE), Georgia's national higher-education quality-assurance agency. NCEQE is currently listed as "member under review" in ENQA's membership database (European Association for Quality Assurance in Higher Education), not a confirmed full member, and its EQAR registration also lapsed in April 2024. GTU has also been a full EUA member since 2001 and implements ECTS credits under the Bologna Process, supporting European academic-credit recognition.

Are GTU's engineering degrees ABET-accredited?

Not confirmed as accredited. GTU's own Biomedical Engineering and Civil Engineering curriculum documents state the programmes are 'prepared in accordance with ABET accreditation standards' and reference named ABET-accredited peer programmes for comparison, but GTU has not published independent confirmation that it holds actual ABET accreditation. Applicants who need ABET-equivalent recognition should verify current status directly with GTU.

How does GTU compare with Georgia's other technical and engineering options?

GTU is Georgia's largest and oldest dedicated technical university, distinct from Georgia's many medical-faculty-focused private universities, and offers a markedly lower flat international tuition (GEL 12,500/year, about USD 4,700) than most Western European technical universities, though its QS ranking (1001-1200 band, 2026) and less-developed international-student support infrastructure reflect that lower cost.

India's Trusted
Study Abroad Platform

Mechanical Engineering at Georgian Technical University

Academic structure, teaching phases, and curriculum for Mechanical Engineering at Georgian Technical University.

Written by Students Traffic Research Team·Updated On: 12 Jul 2026

Georgian Technical University campus overview

Georgian Technical UniversityTbilisi, GeorgiaMechanical Engineering · PublicGEL 12,500/yr

Academics eligibility recognition admissions fees

Academic structure

Mechanical Engineering (Bachelor of Mechanical Engineering)

Duration—4 yearsMedium—EnglishIntake—September, February

Teaching phases

1

Years 1-2: Engineering Fundamentals

Engineering Mathematics 1-2, General Physics, General Chemistry, Descriptive Geometry, Theoretical Mechanics, Strength of Materials, Computer Engineering Graphics with AutoCAD Mechanical, and General Materials Science.

2

Years 3-4: Applied Design and Manufacturing

CAD/CAE technology using Autodesk Inventor, Theory of Mechanisms and Machines, Systems of Automatic Control, Hydraulics and Pneumatics, CNC machine programming, a Mechanical Engineering Internship, and elective tracks such as Robotics or Flexible Manufacturing Systems, culminating in 8-credit Bachelor's Work.

Applying to Georgian Technical University?

Students Traffic verifies seat availability, checks current recognition status, and prepares your complete application for Georgian Technical University. The consultation is free.

Call us Compare colleges

Mechanical Engineering at Georgian Technical University

Academic structure, teaching phases, and curriculum for Mechanical Engineering at Georgian Technical University.

Written by Students Traffic Research Team·Updated On: 12 Jul 2026

Georgian Technical UniversityTbilisi, GeorgiaMechanical Engineering · PublicGEL 12,500/yr

Academics eligibility recognition admissions fees

Academic structure

Mechanical Engineering (Bachelor of Mechanical Engineering)

Duration—4 yearsMedium—EnglishIntake—September, February

Teaching phases

1

Years 1-2: Engineering Fundamentals

Engineering Mathematics 1-2, General Physics, General Chemistry, Descriptive Geometry, Theoretical Mechanics, Strength of Materials, Computer Engineering Graphics with AutoCAD Mechanical, and General Materials Science.

2

Years 3-4: Applied Design and Manufacturing

CAD/CAE technology using Autodesk Inventor, Theory of Mechanisms and Machines, Systems of Automatic Control, Hydraulics and Pneumatics, CNC machine programming, a Mechanical Engineering Internship, and elective tracks such as Robotics or Flexible Manufacturing Systems, culminating in 8-credit Bachelor's Work.

Applying to Georgian Technical University?

Students Traffic verifies seat availability, checks current recognition status, and prepares your complete application for Georgian Technical University. The consultation is free.

Call us Compare colleges

Tuition fee and hostel estimate

Year-wise cost data is not currently published for this program.

Training & support

Practical training & industry exposure

Every GTU Bachelor's programme covered here ends in a supervised capstone. Computer Science students complete a 10-credit Final Project after modules in machine learning, cloud and grid computing, big data and data mining, plus a mandatory 7-credit Internship and a mobile-apps development module. Civil Engineering students complete an 8-credit Bachelor's Project after choosing electives such as bridge, highway, water-treatment or railway engineering. Mechanical Engineering students complete 8-credit Bachelor's Work after an Internship module and electives spanning CNC machine programming, robotics and flexible manufacturing systems. Biomedical Engineering students complete a 10-credit Group Project (Year 3) and a 10-credit Graduation Project plus a Clinical Practice module (Year 4), choosing between Medical Computer Systems or Medical Informatics specialization tracks. MBA students complete a 10-credit Production Practice placement before a 30-credit Master's Thesis with defense. GTU's own Biomedical Engineering and Civil Engineering curriculum documents state both programmes are written to ABET-style Program Educational Objectives and Student Outcomes, referencing named ABET-accredited peer programmes for comparison, though GTU has not published independent confirmation that either programme itself holds ABET accreditation.

Tuition fee and hostel estimate

Year-wise cost data is not currently published for this program.

Training & support

Practical training & industry exposure

Every GTU Bachelor's programme covered here ends in a supervised capstone. Computer Science students complete a 10-credit Final Project after modules in machine learning, cloud and grid computing, big data and data mining, plus a mandatory 7-credit Internship and a mobile-apps development module. Civil Engineering students complete an 8-credit Bachelor's Project after choosing electives such as bridge, highway, water-treatment or railway engineering. Mechanical Engineering students complete 8-credit Bachelor's Work after an Internship module and electives spanning CNC machine programming, robotics and flexible manufacturing systems. Biomedical Engineering students complete a 10-credit Group Project (Year 3) and a 10-credit Graduation Project plus a Clinical Practice module (Year 4), choosing between Medical Computer Systems or Medical Informatics specialization tracks. MBA students complete a 10-credit Production Practice placement before a 30-credit Master's Thesis with defense. GTU's own Biomedical Engineering and Civil Engineering curriculum documents state both programmes are written to ABET-style Program Educational Objectives and Student Outcomes, referencing named ABET-accredited peer programmes for comparison, though GTU has not published independent confirmation that either programme itself holds ABET accreditation.